25SA Rule Fully Automatic 500 Submersible

 

25SA
£ 57.04 ex. VAT
 
Rule Fully Automatic 500 Submersible
Submersible pump 12 volt DC with 750mm cable.
Fully automated bilge pump with computerised operation.

  • Connections: For 19mm (3/4") bore hose.
  • Dimensions: 107mm high, 64mm x 74mm.
  • Current Draw: 1.6(amps)
  • Fuse Size: 4(amp)
  • Output: Up to 31 litres/minute (7 gallons/minute) at 12v, without check valve. Max. recommended discharge head 2m.
  • Fully automated bilge pump with computerised operation.
  • Tough plastic body with integral strainer.
  • Quick release strainer allows rapid cleaning.
  • Low amp draw conserves batteries.
    Checks for water every 2 1/2 minutes (Runs for 1/2 second)
    Consumes 0.20 amps per day
  • Built-in Thermal Cut-Off.
  • Check Valve included for Back Flow Prevention.
  • Vented body to prevent air locking.
  • Threaded port for easier installation and maintenance.
  • No Need for separate float switch, third wire for manual override.
  • Base not interchangeable with old range but can be fitted to existing screw holes.
  • Packaged Dimensions: L:18.00 x H:17.00 x W:9.00cm
  • Actual Weight: 0.41 Kg  (Approx. 0.61 Kg packed)

 
Rule Fully Automatic 500 Submersible
Rule Fully Automatic 500 Submersible


Q&As (0)
Customer Feedback (0)
Spare Parts and Accessories