International Options
Destination
United Kingdom
Currency
GBP £  GBP

United Kingdom
Shopping Basket
Your basket is empty
About Blowers

Blowers are designed to transfer fresh air from outside the boat into poorly ventilated spaces, displacing fumes and odours from galleys and toilet compartments, and fuel vapours from engine compartments.

Blowers can also be used as extractor fans, drawing out fumes so that fresh air is drawn in.

In either case, make sure that the space to be ventilated can 'breathe', or the blower will be ineffective.

 

Flexmount Blower (below) uses a mounting bracket

Flangemount blower (below) mounts from a flange on the discharge port In-line blower (below) is mounted directly into the air conduit, with no change of direction
35515-0010.jpg (4290 bytes) 35400.jpg (4475 bytes)  

 

JABSCO Blower model Blower Type D.C. Voltage Maximum recommended engine
compartment volume, cubic metres.
(Check blower characteristics prior to selection)
35115-0020 Flangemount 12 2
35515-0010 Flexmount 12 2
140 In-line 12 2.6
140-24 In-line 24 2.6
34739-0010 Flangemount 12 2.8
34739-0020 Flangemount 24 2.8
36740-0000 Flexmount 12 2.8
36740-0000 Flexmount 24 2.8
240 In-line 12 7.4
240-24 In-line 24 7.4
35400-0000 Flangemount 12 8.2
35400-0010 Flangemount 24 8.2
35440-0000 Flexmount 12 8.2
35440-0010 Flexmount 24 8.2