28260-2101 3/4" E40 'Epoxy' Flexible Impeller Pump head Kit

 

28260-2101
£ 579.53 ex. VAT
 
3/4" E40 'Epoxy' Flexible Impeller Pump head Kit
To fit IEC 71 standard D80 frame motor. Epoxy plastic wetted parts, with neoprene impeller, nitrile seal trim.

This product is now obsolete.
The details supplied here are for information only.
No replacement

  • Connections: 3/4" BSP ports (male)
  • Dimensions: approx. 123mm long, 110mm wide, 120mm high
  • Output: up to 33 litres/minute at 3m head @ 1500rpm. Max. differential pressure 2bar
  • Chemical resistant High resistance thermoset plastic pump body parts
  • Long-life mechanical shaft seal
  • Widely used for Acids and Alkalis, Electro-plating and Photographic chemicals.
  • Suitable for Transfer, Filling & Emptying, Recirculating/Mixing, Dilution and Waste Disposal duties
  • No metal parts in contact with liquid
  • Viscosities up to 10,000 cP
  • Self-priming up to 4.5m
  • Other Impeller compounds and seal materials also available
  • For motorised options please contact us.
  • Actual Weight: 1.70 Kg  (Approx. 2.20 Kg packed)

 


Q&As (0)
Customer Feedback (0)
Spare Parts and Accessories
£122.82 ex. VAT
Full Parts List
Defining features: Pump head kit/Motor Pump Unit with 3/4" BSP ports, carbon/ceramic mechanical seal.

KeyDescriptionQuantity Reqd.
Per Product
In StockPrice Each
ex. VAT
 
1SCREW4
Checking...
£ 3.64
2END COVER1
Checking...
£ 60.78
3O RING - 3 pieces per pack1
Checking...
£ 11.19
4IMPELLER1
Checking...
£ 52.29
5BODY1
Checking...
£ 149.76
6SEAL ASSY1
Checking...
£ 62.01
7Click here to enquire about this part.1
8WASHER4
Checking...
£ 3.61
9SCREW4
Checking...
£ 0.78
10ADAPTOR1
Checking...
£ 138.62
11Click here to enquire about this part.1
12Click here to enquire about this part.2
13SCREW-ST.ST4
Checking...
£ 3.51
14WASHER-ST.ST4
Checking...
£ 3.51
SERVICE KIT
Contains - Impeller, Seal & Body 'O' Rings
1
Checking...
£ 122.82